Cisco Cisco Packet Data Gateway (PDG) Prospecto
Diameter Endpoint Configuration Mode Commands
▀ response-timeout
▄ Cisco ASR 5x00 Command Line Interface Reference
3352
response-timeout
This command configures the Response Timeout parameter. Response timeout specifies the maximum allowed response
time for request messages sent from Diameter applications to Diameter server. On failure of reception of response for
those request message within this specified time, this will be handled as failure by the corresponding applications and
appropriate failure action will be initiated.
time for request messages sent from Diameter applications to Diameter server. On failure of reception of response for
those request message within this specified time, this will be handled as failure by the corresponding applications and
appropriate failure action will be initiated.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration
configure > context context_name > diameter endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-diameter)#
Syntax
response-timeout timeout
default response-timeout
default
Configures this command with the default setting.
Default: 60 seconds
Default: 60 seconds
timeout
Specifies the response timeout duration in seconds, and must be an integer from 1 through 300.
Usage
Use this command to configure the Response Timeout parameter.
Example
The following command sets the response timeout to
100
seconds:
response-timeout 100