Cisco Cisco Packet Data Gateway (PDG) Prospecto
Exec Mode Commands (A-C)
▀ call-home test
▄ Cisco ASR 5x00 Command Line Interface Reference
3572
call-home test
Sends a test Smart Call Home event message to a specified profile.
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
call-home test message { test_message_content | profile profile name }
call-home test message message test_message_content
Defines the message to send to the defined profile as an alphanumeric string of 1 through 128 characters.
profile profile_name
Specifies the previously defined profile to which the message will be sent, expressed as an alphanumeric
string of 1 through 31 characters.
string of 1 through 31 characters.
Usage
Use this command to send test call-home messages from the CLI to a specified profile. If a message is not
specified, the system sends out a default message.
specified, the system sends out a default message.
Example
The following command sets the system to send a test call-home message
Test_Message_1
to the profile
named
Profile1
.
call-home test message Test_Message_1 profile Profile1