Cisco Cisco Packet Data Gateway (PDG) Prospecto
GGSN Service Configuration Mode Commands
▀ plmn unlisted-sgsn
▄ Cisco ASR 5x00 Command Line Interface Reference
4978
plmn unlisted-sgsn
Configures the GGSN’s policy for handling communications from SGSNs with which it is not configured to
communicate.
communicate.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
default plmn unlisted-sgsn
plmn unlisted-sgsn [[ foregn [ disable-gtpc-echo | rat-type { GAN | GERAN | HSPA | UTRAN
| WLAN } ] | reject-foreign-subscriber ] | home [ disable-gtpc-echo | rat-type { GAN |
GERAN | HSPA | UTRAN | WLAN } ] | mcc mcc_value mnc mnc_value [ disable-gtpc-echo |
reject-foreign-subscriber ]] [ rat-type { GAN | GERAN | HSPA | UTRAN | WLAN } ] | reject
] ]
| WLAN } ] | reject-foreign-subscriber ] | home [ disable-gtpc-echo | rat-type { GAN |
GERAN | HSPA | UTRAN | WLAN } ] | mcc mcc_value mnc mnc_value [ disable-gtpc-echo |
reject-foreign-subscriber ]] [ rat-type { GAN | GERAN | HSPA | UTRAN | WLAN } ] | reject
] ]
default
Resets configured parameters to their default settings.
foreign
Default: Disabled
Specifies that the GGSN service accepts messages from SGSNs that are not configured within the service
using the
Specifies that the GGSN service accepts messages from SGSNs that are not configured within the service
using the
sgsn address
command.
This keyword also dictates that unlisted SGSNs are treated as if they belong to a foreign PLMN. Therefore,
PDP contexts originating from them are treated as visiting or roaming.
PDP contexts originating from them are treated as visiting or roaming.
mcc
mcc_value
Specifies the mobile country code (MCC) portion of the PLMN’s identifier.
mcc_value
is the PLMN MCC identifier and can be configured to an integer from 100 through 999.
mnc
mnc_value
Specifies the mobile network code (MNC) portion of the PLMN’s identifier.
mnc_value
is the PLMN MNC identifier and can be configured to a 2- or 3-digit integer from 00 through
999.
disable-gtpc-echo
Default: Send GTPC Echo messages to unlisted SGSNs.