Cisco Cisco Packet Data Gateway (PDG) Prospecto
HNB-GW Global Configuration Mode Commands
▀ paging hybrid-hnb
▄ Cisco ASR 5x00 Command Line Interface Reference
6078
paging hybrid-hnb
Configures paging optimization parameters for hybrid HNBs connected through Hybrid Access mode in the HNB-GW
Global parameter.
Global parameter.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-GW Global Configuration
configure > hnbgw-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-hnggw-global)#
Syntax
paging hybrid-hnb always
paging hybrid-hnb hnb-where-ue-registered [hnbs-having-imsi-in-whitelist] fallback
{always | never |only-if-with-paging-area}
{always | never |only-if-with-paging-area}
paging hybrid-hnb hnbs-having-imsi-in-whitelist fallback {always | never |only-if-with-
paging-area}
paging-area}
paging hybrid-hnb never
paging hybrid-hnb only-if-with-paging-area
default paging hybrid-hnb
default
Sets the default behavior of paging optimization configuration for a hybrid HNB while using Hybrid Access
mode support.
By default the HNB-GW pages hybrid HNBs only if paging-area IE is received in the paging message.
mode support.
By default the HNB-GW pages hybrid HNBs only if paging-area IE is received in the paging message.
{
always
|
never
|
only-if-with-paging-area
}
Sets the HNB-GW Global parameter to page hybrid HNB for a paging message.
always
: Sets the system to ALWAYS page the hybrid HNBs irrespective of paging-area IE is received in
paging messages.
never
: Sets the system to NEVER page any hybrid HNB.
only-if-with-paging-area
: Sets the system to page the hybrid HNBs only when paging-area IE is
received in paging messages.
hnb-where-ue-registered fallback
{
always
|
never
|
only-if-with-paging-area
}
Sets the HNB-GW Global parameter to page hybrid HNB from where the UE is registered.