Cisco Cisco Packet Data Gateway (PDG) Prospecto
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
ACS Rulebase Configuration Mode Commands
▀ egcdr tariff
▄ Cisco ASR 5x00 Command Line Interface Reference
656
egcdr tariff
This command allows you to configure the eG-CDR tariff time to generate new eG-CDRs for GGSN and P-GW-CDRs
for P-GW.
for P-GW.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
[ no ] egcdr tariff minute minute hour hour
no
If previously configured, deletes the configuration from the current rulebase.
minute minute
Specifies the minute for the time-of-day configuration.
minute
must be an integer from 0 through 59.
hour hour
Specifies the hour for the time-of-day configuration.
hour
must be an integer from 0 through 23.
Usage
Use this command to configure the eG-CDR tariff time to generate new eG-CDRs for GGSN and P-GW-
CDRs for P-GW. Up to four different time-of-day settings may be configured. When any configured tariff
time is reached, the current eG-CDR/P-GW-CDR will be closed and a new eG-CDR/P-GW-CDR is opened.
CDRs for P-GW. Up to four different time-of-day settings may be configured. When any configured tariff
time is reached, the current eG-CDR/P-GW-CDR will be closed and a new eG-CDR/P-GW-CDR is opened.
Example
The following command defines an eG-CDR tariff for the 23rd minute of the 22nd hour of the day
(10:23 PM):
(10:23 PM):
egcdr tariff minute 23 hour 22