Cisco Cisco Packet Data Gateway (PDG) Prospecto
MAG Service Configuration Mode Commands
retransmission-timeout ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6817
retransmission-timeout
Configures the maximum allowable time for the MAG service to wait for a response from the LMA before it attempts to
communicate with the LMA again (if the system is configured to retry the LMA), or marks the LMA as unreachable.
communicate with the LMA again (if the system is configured to retry the LMA), or marks the LMA as unreachable.
Product
HSGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MAG Service Configuration
configure > context context_name > mag-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mag-service)#
Syntax
retransmission-timeout time
[ default | no ] retransmission-timeout
default
Resets the timeout setting to the default value of 3,000 milliseconds.
no
Deletes a previously configured timeout value.
time
Default: 3000
Specifies the maximum allowable time (in milliseconds) for the MAG service to wait for a response from the
LMA before it: (a) attempts to communicate with the LMA again (if the system is configured to retry the
LMA) or (b) marks the LMA as unreachable.
Specifies the maximum allowable time (in milliseconds) for the MAG service to wait for a response from the
LMA before it: (a) attempts to communicate with the LMA again (if the system is configured to retry the
LMA) or (b) marks the LMA as unreachable.
time
must be an integer from 100 through 100000.
Usage
Use the retransmission timeout command in conjunction with the
max-retransmissions
command in
order to configure the MAG services behavior when it does not receive a response from a particular LMA.
Example
The following command configures a retransmission timeout value of 5000 milliseconds:
retransmission-timeout 5000