Cisco Cisco Packet Data Gateway (PDG) Prospecto
MME SGs Service Configuration Mode Commands
sctp ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7001
sctp
Configures the Stream Control Transmission Protocol (SCTP) port number for this service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME SGs Service Configuration
configure > context context_name > sgs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgs-service)#
Syntax
sctp port port_number
no sctp
no
Removes the SCTP configuration for this service.
port port_number
Specifies the SCTP port number used to communicate with the MSC/VLR using the SGs interface as an
integer from 1 through 65535.
integer from 1 through 65535.
Usage
Use this command to assign the SCTP port with SCTP socket to communicate with the MSC/VLR through
the SGs interface. A maximum of one SCTP port can be associated with one SGs service.
the SGs interface. A maximum of one SCTP port can be associated with one SGs service.
Example
The following command sets the SCTP port to
29118
for this service:
sctp port 29118