Cisco Cisco Packet Data Gateway (PDG) Prospecto
ACS Ruledef Configuration Mode Commands
bearer 3gpp sgsn-address ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
765
bearer 3gpp sgsn-address
This command allows you to define rule expressions to match SGSN address associated in the bearer flow.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Ruledef Configuration
active-charging service service_name > ruledef ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-ruledef)#
Syntax
[ no ] bearer 3gpp sgsn-address operator ipv4/ipv6_address
no
If previously configured, deletes the specified rule expression from the current ruledef.
operator
Specifies how to match.
operator
must be one of the following:
!=
: Does not equal
=
: Equals
ipv4/ipv6_address
Specifies the SGSN IP address to match.
ipv4/ipv6_address
must be in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.
Usage
Use this command to define rule expressions to match IP address of an SGSN node. This command replaces
the
the
bearer sgsn-address
command.
Example
The following command defines a rule expression to analyze user traffic for an SGSN node with IP address
10.1.1.1
:
bearer 3gpp sgsn-address = 10.1.1.1