Cisco Cisco Packet Data Gateway (PDG) Prospecto
RLF Template Configuration Mode Commands
threshold ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7747
threshold
Configures the threshold for rate-limiting the outgoing messages.
Product
GGSN
P-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > RLF Template Configuration
configure > rlf-template rlf_template_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(cfg-rlf-template)#
Syntax
threshold { lower lowerThreshold_value | upper upperThreshold_value } [ -noconfirm ]
default threshold
default
Returns the command to its default settings.
lower lowerThreshold_value
This threshold indicates that the application has message-rate control enabled.
Default is 30%. If the number of outstanding messages in the RLF queue drops below 30% of msg-rate, RLF
will transition to READY state.
Default is 30%. If the number of outstanding messages in the RLF queue drops below 30% of msg-rate, RLF
will transition to READY state.
upper upperThreshold_value
This threshold indicates that action will be taken when the message-rate reaches the maximum limit.
Default is 80%. If the number of outstanding messages in the RLF queue exceeds 80% of msg-rate, RLF will
transition to OVER_THRESHOLD state.
Default is 80%. If the number of outstanding messages in the RLF queue exceeds 80% of msg-rate, RLF will
transition to OVER_THRESHOLD state.
Usage
Use this command to configure the desired threshold value for rate limiting the outgoing messages.
The configurable threshold value of TPS for an interface is used to notify applications of corrective actions
when the threshold criteria is met.
The configurable threshold value of TPS for an interface is used to notify applications of corrective actions
when the threshold criteria is met.
Example
The following command configures the upper threshold to 80 and the lower threshold to 60 for throttling and
rate control:
rate control:
threshold upper 80 lower 60