Cisco Cisco Packet Data Gateway (PDG) Prospecto
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
RoHC Profile Compression Configuration Mode Commands
▀ total-jitter-ipv4
▄ Cisco ASR 5x00 Command Line Interface Reference
7810
total-jitter-ipv4
Specifies the total jitter allowed after compression for IPv4.
Product
HSGW
PDSN
Privilege
Administrator
Mode
Exec > Global Configuration > RoHC Profile Configuration > RoHC Profile Compression Configuration
configure > rohc-profile profile-name profile_name > compression-options
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-rohcprofile-profile_name-comp)#
Syntax
total-jitter-ipv4 time
default total-jitter-ipv4
default
Returns the command to its default value of 270.
time
Specifies the time interval to use (in milliseconds) as an integer from 0 through 999999999.
Default: 270
Default: 270
Usage
Use this command to set the jitter limit after compression.
Example
The following command sets the jitter after compression limit to 900 ms:
total-jitter-ipv4 900