Cisco Cisco Packet Data Gateway (PDG) Prospecto
Subscriber Configuration Mode Commands
▀ asn nspid
▄ Cisco ASR 5x00 Command Line Interface Reference
8216
asn nspid
Specifies the network service provider (NSP) associated with a WiMAX subscriber in an ASN-GW service. When
configured, the NSP ID is sent in the Access-Request and Accounting messages.
configured, the NSP ID is sent in the Access-Request and Accounting messages.
Product
ASN-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ no ] asn nspid nsp_id
no
Removes or disables the configured identifiers for this network service provider in ASN-GW service.
asn nspid
nsp_id
Specifies the network service provider for this subscriber. This enables the MS to discover all accessible
NSPs, and to indicate the NSP selection during connectivity to the ASN.
NSPs, and to indicate the NSP selection during connectivity to the ASN.
Usage
Use this command to specify the NSP associated with a subscriber in an ASN-GW service.
nsp_id
is three bytes in hexadecimal format. For example: FF-EE-01
Example
The following command specifies the NSP for a subscriber in an ASN service:
asn nspid 0F-01-FE