Cisco Cisco Packet Data Gateway (PDG) Prospecto
Subscriber Configuration Mode Commands
▀ ip address
▄ Cisco ASR 5x00 Command Line Interface Reference
8262
ip address
Configures a static IPv4 address for use by the subscriber.
Product
PDSN
GGSN
HA
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ no ] ip address ip_address netmask
no
Removes a previously configured IP address assignment.
ip address
ip_address
Specifies the IP address assigned to the subscriber using IPv4 dotted-decimal notation.
netmask
The subnet mask that corresponds to the assigned IPv4 address.
Usage
Use this command to assign a static IPv4 address to the subscriber. This address will be used each time the
subscriber establishes data sessions.
subscriber establishes data sessions.
Example
The following command configures a static IP address of
192.168.1.15
with a subnet mask of
255.255.255.0
to the subscriber:
ip address 192.168.1.15 255.255.255.0