Cisco Cisco Packet Data Gateway (PDG) Prospecto
ACS Ruledef Configuration Mode Commands
▀ icmp type
▄ Cisco ASR 5x00 Command Line Interface Reference
880
icmp type
This command allows you to define rule expressions to match value in Type field of ICMP packets.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Ruledef Configuration
active-charging service service_name > ruledef ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-ruledef)#
Syntax
[ no ] icmp type operator type
no
If previously configured, deletes the specified rule expression from the current ruledef.
operator
Specifies how to match.
operator
must be one of the following:
!=
: Does not equal
<=
: Lesser than or equals
=
: Equals
>=
: Greater than or equals
type
Specifies the ICMP type to match.
type
must be an integer from 0 through 255. For example, 0 for Echo Reply, 3 for Destination Unreachable,
and 5 for Redirect.
Usage
Use this command to define rule expressions to match a type field of ICMP packets.
Example
The following command defines a rule expression to match user traffic based on ICMP type
3
:
icmp type = 3