Cisco Cisco Tunnel Terminating Gateway (TTG) Prospecto
OSPFv3 Configuration Mode Commands
passive Interface ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7159
passive Interface
Configures an OSPFv3 passive interface as passive. If a network interface is configured as passive, it will not receive or
send any OSPFv3 packets.
send any OSPFv3 packets.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > OSPFv3 Configuration
configure > context context_name > router ospfv3
Entering the above command sequence results in the following prompt:
[local]host_name(config-ospfv3)#
Syntax
[ no ] passive-interface passive_interface_name
no
Disables the passive interface.
passive-interface
passive_interface_name
Sets the named interface to be a passive interface as an alphanumeric string of 1 through 79 characters.
Usage
Use this command to configure an OPSFv3 passive interface in this context.
Example
The following command configures an OSPFv3 passive interface.
passive-interface OSPF-if1