Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
ALCAP Configuration Mode Commands
▀ self-point-code
▄ Cisco ASR 5x00 Command Line Interface Reference
1224
self-point-code
This command specifies the SS7 point code address for ALCAP service.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > ALCAP Service Configuration
configure > context context_name > alcap-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-alcap-service-service_name)#
Syntax
self-point-code point_code
no self-point-code
no
Deletes the configured self point code for this ALCAP service.
point_code
Defines the point code to assign to this ALCAP service.
point_code:
value entered must adhere to the point code variant selected when the ALCAP service
instance was defined:
ITU Range 0.0.1 to 7.255.7
ANSI Range 0.0.1 to 255.255.255
TTC Range 0.0.1 to 15.31.255
a string of 1 to 11 combined digits and period.
Usage
Use this command to assign the self point code to use for this ALCAP service.
Example
The following command sets an ITU-based point code for this ALCAP service:
self-pointcode 4.121.5
The following command removes the configured self-point code:
no self-pointcode