Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
APN Configuration Mode Commands
timeout idle micro-checkpoint-periodicity ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1395
timeout idle micro-checkpoint-periodicity
Enables configuration of periodic idle seconds micro checkpoint timer on a per-APN basis.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
timeout idle idle_dur [ micro-checkpoint-periodicity time_in_seconds ]
[ default | no ] timeout idle
default | no
Indicates the timeout specified is to be returned to its default behavior. If no specific timeout is specified, then
all are set to their default behavior.
all are set to their default behavior.
idle_dur
Designates the maximum duration of the session (in seconds). After expiry, the system considers the session
as dormant or idle and terminates the session.
as dormant or idle and terminates the session.
idle_dur
must be an integer value in the range from 0 through 4294967295.
Default: 0
The special value 0 disables the timeout specified.
The special value 0 disables the timeout specified.
micro-checkpoint-periodicity time_in_seconds
Configures periodic idle seconds micro checkpoint timer on a per-APN basis.
Idle seconds micro checkpoints are sent at the configured regular intervals to the standby chassis; otherwise,
they are sent at intervals of 10 seconds, which is the default value.
Idle seconds micro checkpoints are sent at the configured regular intervals to the standby chassis; otherwise,
they are sent at intervals of 10 seconds, which is the default value.
time_in_seconds
must be an integer value in the range from 0 through 4294967295.
Default: 10
Important:
Micro-checkpoint-periodicity value should be less than idle timeout value.
Usage
Use this command to set the idle time duration and micro-checkpoint-periodicity timer for subscriber session
to determine the dormant session.
to determine the dormant session.
Example