Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
APN Configuration Mode Commands
▀ tunnel ipsec
▄ Cisco ASR 5x00 Command Line Interface Reference
1406
tunnel ipsec
This command configures sessions for the current APN to use an Internet Protocol Security (IPSec) tunnel based on the
IP pool corresponding to the subscribers assigned IP address.
IP pool corresponding to the subscribers assigned IP address.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
[ no ] tunnel ipsec use-policy-matching-ip-pool
no
Disables the use of the IPSec policy that matches the IP pool that the assigned IP address relates to.
Usage
Use this command to set the APN to use an IPSec policy that is assigned to the IP pool that the subscribers
assigned IP address relates to.
assigned IP address relates to.
Example
The following command enables the use of the policy that matches the IP pool address:
tunnel ipsec use-policy-matching-ip-pool