Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
APN Configuration Mode Commands
▀ virtual-apn gdcr
▄ Cisco ASR 5x00 Command Line Interface Reference
1410
virtual-apn gdcr
Defines which APN (Gn or virtual) is used in charging records.
Product
eWAG
GGSN
IPSG
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
virtual-apn gcdr apn-name-to-be-included { Gn | virtual }
default virtual-apn gcdr apn-name-to-be-included
default
Returns the CDR related parameters to the default values.
gcdr apn-name-to-be-included { gn | virtual }
Defines which APN is to be sent in charging records (CDR):
Gn
: Use the Gn APN name received in the Create PDP Context Request message from SGSN or the S5 APN
name received in the PDN Connectivity Request from MME.
virtual
: Use the virtual APN selected by the GGSN/P-GW. This is the default.
Usage
Defines which APN is to be sent in charging records (CDR), either the APN received in the Create PDP
Context Request from the SGSN, or the APN received in the PDN Connectivity Request from the MME.
Context Request from the SGSN, or the APN received in the PDN Connectivity Request from the MME.
Example
The following command configures the gateway to use the APN supplied by the SGSN or MME.
virtual-apn gcdr apn-name-to-be-included gn