Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
APN Profile Configuration Mode
direct-tunnel ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1425
direct-tunnel
Defines the permission for direct tunnel establishment by GGSNs. This command is specific to the SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
direct-tunnel not-permitted-by-ggsn
remove direct-tunnel
remove
Removes the direct tunnel establishment configuration from this APN profile.
not-permitted-by-ggsn
Specifies that a direct tunnel is not permitted by the GGSN when resolved by this APN.
Default: disabled.
Default: disabled.
Usage
Use this command to enable/disable the permission for establishment of direct tunnels between an RNC and a
GGSN.
GGSN.
Example
The following command instructs the SGSN not to permit establishment of a direct tunnel with a GGSN:
direct-tunnel not-permitted-by-ggsn