Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
APN Profile Configuration Mode
pdp-data-inactivity ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1443
pdp-data-inactivity
Configures the APN profile regarding PDP data inactivity. This command is specific to the SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
pdp-data-inactivity { action { deactivate [ all-pdp | linked-pdp ] | detach-when { all-
pdp-inactive | any-pdp-inactive } } | timeout minutes minutes }
pdp-inactive | any-pdp-inactive } } | timeout minutes minutes }
default pdp-data-inactivity { action | timeout }
no pdp-data-inactivity timeout
default
Resets the APN Profile configuration to the default values for PDP data-inactivity.
no
Disables the timeout feature of the PDP data-inactivity configuration for this APN profile.
action
Defines the action to be taken if PDP data-inactivity occurs:
deactivate
- defines which PDP context should be deactivated:
all-pdp
- deactivates all PDP contexts.
linked-pdp
- deactivates only linked PDP contexts.
detach-when
- defines the condition that warrants a detach:
all-pdp-inactive
- detach when all PDP contexts are inactive.
any-pdp-inactive
- detach when any PDP context is inactive.
timeout minutes
minutes
Specifies the inactivity timeout in minutes.
minutes:
is an integer from 1 through 1440. Note that even
though the timeout is set for minutes, the configuration displays in seconds.