Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
BGP Configuration Mode Commands
router-id ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1569
router-id
Overrides the configured router identifier and causes BGP peers to reset.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > BGP Configuration
configure > context context_name > router bgp as_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-bgp)#
Syntax
router-id ip_address
no router-id [ ip_address ]
no
Remove the specified router ID from the router’s configuration and use the default router ID.
router-id
ip_address
Specifies the IP address to use as the BGP router ID as an IPv4 address in dotted-decimal notation.
Usage
Use this command to configure a specific router ID that overrides the default.
Example
The following command sets the router ID to
192.168.100.25
:
router-id 192.168.100.25