Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Call Control Profile Configuration Mode
▀ attach allow
▄ Cisco ASR 5x00 Command Line Interface Reference
1798
attach allow
Configures the system to re-enable attaches that were previously restricted using the
attach restrict
command..
Important:
SGSN only: Before using this command, ensure that the appropriate location area code (LAC)
information has been defined via the
location-area-list
command.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ no ] attach allow access-type { eps | gprs | umts } location-area-list instance list_id
no
Deletes the specified attach configuration.
allow
Enables attaches in the configuration after an
attach restrict
command has been used.
access-type type
Defines the type of access to be allowed.
eps
gprs
umts
location-area-list instance
list_id
Instructs the SGSN to apply the command action to a specific location area list. Location area lists should
already have been created with the
already have been created with the
location-area-list
command. The location area list consists of one
or more LACs, location area codes, where the MS is when placing the call.
list_id
: Enter an integer between 1 and 5.