Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Call Control Profile Configuration Mode
▀ cc
▄ Cisco ASR 5x00 Command Line Interface Reference
1820
cc
Defines the charging characteristics to be applied for CDR generation when the handling rules are applied via the
Operator Policy feature.
Operator Policy feature.
Product
MME
SAEGW
S-GW
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
cc { behavior-bit no-records bit_value | local-value behavior bit_value profile index_bit
| prefer { hlr-hss-value | local-value } }
| prefer { hlr-hss-value | local-value } }
no cc behavior-bit no-records
remove cc { behavior-bit no-records | local-value | prefer }
no
Disables the no records generation behavior-bit configuration for this call control profile.
remove
Removes the specified charging characteristic configuration from this profile.
behavior-bit no-records bit_value
Default: disabled
Specifies the charging characteristic behavior bit.
Specifies the charging characteristic behavior bit.
no-records
instructs the system not to generate any
accounting records regardless of what may be configured elsewhere.
bit_value
is an integer from 1 through 12.
local-value behavior bit_value profile index_bit
Defaults: bit_value = 0x0, index_bit = 8
Sets the local value of the behavior bits and profile index for the charging characteristics when the HLR/HSS
does not provide values for these parameters.
Sets the local value of the behavior bits and profile index for the charging characteristics when the HLR/HSS
does not provide values for these parameters.
bit_value
is a hexadecimal value between 0x0 and 0xFFF.
index_bit
is an integer value from 1 through 15.