Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Call Control Profile Configuration Mode
local-cause-code-mapping ctxt-xfer-fail-sgsn ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1867
local-cause-code-mapping ctxt-xfer-fail-sgsn
Configures the reject cause code to send to a UE when a UE context transfer failure from a peer SGSN occurs.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
local-cause-code-mapping ctxt-xfer-fail-sgsn emm-cause-code { eps-service-not-allowed-in-
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
remove local-cause-code-mapping ctxt-xfer-fail-sgsn
remove local-cause-code-mapping ctxt-xfer-fail-sgsn
Removes the configured cause code mapping.
ctxt-xfer-fail-sgsn emm-cause-code { eps-service-not-allowed-in-this-plmn |
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed }
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when a UE context transfer failure
from a peer SGSN occurs.
from a peer SGSN occurs.
eps-service-not-allowed-in-this-plmn
network-failure
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
Usage
Use this command to configure the cause code returned to a UE when a UE context transfer failure from a
peer SGSN occurs. By default, the MME sends the UE the #9 - MS identity cannot be derived by the
network cause code when encountering this condition.
After the peer node has been identified, the MME sends a Context Request to the peer node. If the peer node
is an SGSN, and if the context transfer procedure fails, this condition is detected.
peer SGSN occurs. By default, the MME sends the UE the #9 - MS identity cannot be derived by the
network cause code when encountering this condition.
After the peer node has been identified, the MME sends a Context Request to the peer node. If the peer node
is an SGSN, and if the context transfer procedure fails, this condition is detected.