Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Call Control Profile Configuration Mode
▀ prefer subscription-interface
▄ Cisco ASR 5x00 Command Line Interface Reference
1918
prefer subscription-interface
Selects the specified subscription interface (Gr or S6d) if both interface types are associated with a call-control-profile.
Use of this command requires an S6d license.
Use of this command requires an S6d license.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
prefer subscription-interface { hlr | hss }
remove prefer subscription-interface
remove
Removes the preferred subscription-interface for the call control profile.
hlr
Selects the HLR Gr interface.
hss
Selects the HSS S6d interface.
Usage
Use of this command requires an S6d license.
The SGSN provides a mechanism to associate a MAP service with call control profile. It is possible that both
MAP service and HSS peer service are associated with the call control profile. If the interface preference
selected is “hlr”, the MAP protocol is used to exchange messages with the HLR. If the interface preference
selected is “hss”, the Diameter-protocol is used to exchange messages with the HSS.
The SGSN provides a mechanism to associate a MAP service with call control profile. It is possible that both
MAP service and HSS peer service are associated with the call control profile. If the interface preference
selected is “hlr”, the MAP protocol is used to exchange messages with the HLR. If the interface preference
selected is “hss”, the Diameter-protocol is used to exchange messages with the HSS.
Example
The following command specifies that “hss” for S6d is selected as the subscription-interface:
prefer subscription-interface hss