Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Call Control Profile Configuration Mode
rau-inter ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1927
rau-inter
Defines acceptable parameters for inter-SGSN routing area updates.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
rau-inter { accept use-auth-vector | access-type gprs { all | location-area-list instance
instance } { failure-code fail_code | user-device-release { before-r99 | r99-or-later }
failure-code fail_code } } | allow accept access-type gprs location-area-list instance
instance | avoid-s12-direct-tunnel| ignore-peer-context-id | peer-sgsn-addr-resolution-
failure failure-code fail_code | restrict access-type { { gprs | umts } { all | location-
area-list instance instance } }
instance } { failure-code fail_code | user-device-release { before-r99 | r99-or-later }
failure-code fail_code } } | allow accept access-type gprs location-area-list instance
instance | avoid-s12-direct-tunnel| ignore-peer-context-id | peer-sgsn-addr-resolution-
failure failure-code fail_code | restrict access-type { { gprs | umts } { all | location-
area-list instance instance } }
default rau-inter ( accept use-auth-vector | access-type { { gprs | umts } { all |
location-area-list instance instance } user-device-release { before-r99 | r99-or-later }
failure-code fail_code } } | avoid-s12-direct-tunnel | failure-code fail_code | ignore-
peer-context-id | peer-sgsn-addr-resolution-failure failure-code fail_code }
location-area-list instance instance } user-device-release { before-r99 | r99-or-later }
failure-code fail_code } } | avoid-s12-direct-tunnel | failure-code fail_code | ignore-
peer-context-id | peer-sgsn-addr-resolution-failure failure-code fail_code }
no rau-inter ( accept use-auth-vector | allow access-type { gprs | umts } location-area-
list instance instance | ignore-peer-context-id | restrict access-type { gprs | umts } {
all | location-area-list instance instance } }
list instance instance | ignore-peer-context-id | restrict access-type { gprs | umts } {
all | location-area-list instance instance } }
remove rau-interavoid-s12-direct-tunnel
no
Including
no
as part of the command structure disables the values already configured for parameters specified
in the command.
default
Resets the configuration of specified parameters to system default values.
remove
remove
can only be used with the
avoid-s12-direct-tunnel
keyword to erase a configuration
instructing the SGSN to avoid establishment of a direct tunnel for S12 interfaces.
accept use-auth-vector
Sets the SGSN to accept using the authorization vector.