Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Call Control Profile Configuration Mode
▀ srvcc exclude-stnsr-nanpi
▄ Cisco ASR 5x00 Command Line Interface Reference
1962
srvcc exclude-stnsr-nanpi
Configures the MME to not include the Nature of Address and Numbering Plan Indicator (NANPI) in the Session
Transfer Number for Single Radio Voice Call Continuity (STN-SR) IE on Sv interface in PS to CS requests to the MSC
server and Forward Relocation requests to the peer-SGSN/peer-MME.
Transfer Number for Single Radio Voice Call Continuity (STN-SR) IE on Sv interface in PS to CS requests to the MSC
server and Forward Relocation requests to the peer-SGSN/peer-MME.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ remove ] srvcc exclude-stnsr-nanpi
remove
Deletes this configuration from the call control profile. This returns the MME to its default configuration
where the NANPI is not included in the STN-SR IE.
where the NANPI is not included in the STN-SR IE.
Usage
This command applies to Release 15.0 MR3 and higher.
In Release 15.0 MR3 and later releases, the encoding of the STN-SR IE on Sv interface now includes the
NANPI from the HSS in PS to CS requests to the MSC server and Forward Relocation requests to the peer-
SGSN/peer-MME. The value of NANPI sent by the MME is 0x11. This change in behavior is provided in
support of TS 29.280 V10.1.0.
This command provides an option to maintain backward compatibility. When this command is issued, the
MME excludes the NANPI from these requests, as was the default in releases prior to 15.0 MR3.
In Release 15.0 MR3 and later releases, the encoding of the STN-SR IE on Sv interface now includes the
NANPI from the HSS in PS to CS requests to the MSC server and Forward Relocation requests to the peer-
SGSN/peer-MME. The value of NANPI sent by the MME is 0x11. This change in behavior is provided in
support of TS 29.280 V10.1.0.
This command provides an option to maintain backward compatibility. When this command is issued, the
MME excludes the NANPI from these requests, as was the default in releases prior to 15.0 MR3.