Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Call-Home Configuration Mode
▀ mail-server
▄ Cisco ASR 5x00 Command Line Interface Reference
1982
mail-server
Configures the Smart Call Home mail-server.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call-Home Configuration
configure > call-home
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-home)#
Syntax
[ no ] mail-server server_name priority priority_num
no
Removes the call-home mail-server.
mail-server
server_name
Identifies the mail server as an alphanumeric string of 1 through 64 characters. The server ID can take the
form of a host name (DNS) or an IPv4 address in dotted-decimal notation.
form of a host name (DNS) or an IPv4 address in dotted-decimal notation.
priority
Sets the mail server priority order as an integer from 1 (highest) to 100 (lowest).
Usage
Use this command to set up the mail server for Smart Call Home. This configuration is mandatory when the
user profile is configured to only send out e-mail messages.
user profile is configured to only send out e-mail messages.
Example
The following command specifies the mail-server as
10.2.3.4
with a priority of
1
:
mail-server 10.2.3.4 priority 1