Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Channelized Port Configuration Mode Commands
alarm-soak-timer ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2039
alarm-soak-timer
This command sets the timer for the duration that a detected alarm will be soaked before the alarm is reported.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Channelized Port Configuration
configure > port channelized slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
alarm-soak-timer seconds
default alarm-soak-timer
default
Returns the timer settings to the system default.
seconds
Defines the number of seconds the system waits (soaks the alarm) before reporting the alarm.
seconds
: any integer from 0 to 32767.
Usage
Configures the delay before reporting detected alarms.
Example
Configure a 20 second alarm report delay.
alarm-soak-timer 20