Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Context Configuration Mode Commands A-D
cscf acl ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2211
cscf acl
Creates an Access Control List (ACL) and enters the ACL Configuration Mode.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
cscf acl { default | name list_name } [ -noconfirm ]
no cscf acl name list_name
no
Removes the CSCF ACL from the context.
default
Specifies that the system is to enter the ACL Configuration Mode for the default ACL.
name
list_name
Specifies a name for the ACL as an alphanumeric string of 1 through 47 characters.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage
Use this command to create an access control list for the CSCF service and cause the system to enter the ACL
Configuration Mode where parameters are configured for the new list.
Entering this command results in the following prompt:
Configuration Mode where parameters are configured for the new list.
Entering this command results in the following prompt:
[context_name]hostname(config-cscf-acl)#
ACL Configuration Mode commands are defined in the CSCF ACL Configuration Mode Commands chapter.
Use this command when configuring the following SCM components: P-CSCF, S-CSCF, and SIP Proxy.
Use this command when configuring the following SCM components: P-CSCF, S-CSCF, and SIP Proxy.
Example
The following command creates a CSCF access control list named
acl1
and enters the ACL Configuration
Mode:
cscf acl name acl1