Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Context Configuration Mode Commands E-H
▀ gs-service
▄ Cisco ASR 5x00 Command Line Interface Reference
2288
gs-service
Creates a Gs service instance and enters the Gs Service Configuration Mode. This mode configures the parameters
specific to the Gs interface between the SGSN and the MSC/VLR.
specific to the Gs interface between the SGSN and the MSC/VLR.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
gs-service svc_name [ -noconfirm ]
no gs-service svc_name
no
Remove the configured Gs service from the current context.
svc_name
Specifies the Gs service as a unique alphanumeric string of 1 through 63 characters.
Important:
Service names must be unique across all contexts within a chassis.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage
Use this command to create, edit, or remove a Gs service.
A maximum of 32 Gs service can be configured in one context/system. This limit is subject to maximum of
256 services (regardless of type) can be configured per system.
A maximum of 32 Gs service can be configured in one context/system. This limit is subject to maximum of
256 services (regardless of type) can be configured per system.
Important:
For details about the commands and parameters for this mode, refer Gs Service Configuration Mode
chapter.
Example
The following command creates an Gs service named
gs1
:
gs-service gs1