Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Context Configuration Mode Commands I-M
l2tp peer-dead-time ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2439
l2tp peer-dead-time
Configures a delay when attempting to tunnel to a specific peer which is initially unreachable due to reasons such as a
network issue or temporarily having reached its capacity.
network issue or temporarily having reached its capacity.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
l2tp peer-dead-time seconds
default l2tp peer-dead-time
default
Rests the command to its default setting of 60.
seconds
Specifies the interval (in seconds) to wait before attempting to tunnel to a specific peer which is initially
unreachable as an integer from 5 through 64,000. Default: 60
unreachable as an integer from 5 through 64,000. Default: 60
Usage
The time to wait before trying to establish a tunnel to a known peer after the initial attempt was unsuccessful.
Example
The following example configures the delay in attempting to tunnel to a temporarily unreachable peer. The
delay is set to
delay is set to
120
seconds in this example.
l2tp peer-dead-time 120