Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Context Configuration Mode Commands I-M
▀ logging
▄ Cisco ASR 5x00 Command Line Interface Reference
2450
logging
Modifies the logging options for a specified system log server for the current context.
Product
All
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] logging syslog ip_address [ event-verbosity { min | concise | full } ] [ facility
facilities ] [ pdu-data { none | hex | hex-ascii } ] [ pdu-verbosity pdu_level ] [ rate
value ]
facilities ] [ pdu-data { none | hex | hex-ascii } ] [ pdu-verbosity pdu_level ] [ rate
value ]
no
Indicates that internal logging is to be disabled for the options specified.
syslog
ip_address
Specifies the IP address of a system log server on the network in IPv4 dotted-decimal or IPv6 colon-
separated-hexadecimal notation.
separated-hexadecimal notation.
event-verbosity { min | concise | full }
Specifies the level of detail to use in logging of events. Detail level must be one of the following:
min
: Displays minimal detail.
concise
:Displays summary detail.
full
: Displays full detail.
facility facilities
Default:
local7
Specifies the local facility for which the system logging server’s logging options shall be applied. Local
facility must be one of the following:
facility must be one of the following:
local0
local1
local2
local3
local4
local5