Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Credit Control Configuration Mode Commands
▀ usage-reporting
▄ Cisco ASR 5x00 Command Line Interface Reference
2694
usage-reporting
This command configures the ACS Credit Control usage reporting type.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Credit Control Configuration
active-charging service service_name > credit-control
Entering the above command sequence results in the following prompt:
[local]host_name(config-dcca)#
Syntax
usage-reporting quotas-to-report based-on-grant { report-only-granted-volume }
default usage-reporting quotas-to-report
default
Configures this command with the default setting.
Default: Disabled
Default: Disabled
report-only-granted-volume
Suppresses the input and output octets. If the Granted-Service-Unit (GSU) AVP comes with CC-Total-Octets,
then the device will send total, input and output octets in Used-Service-Unit (USU) AVP. If it comes with
Total-Octets, the device will send only Total-Octets in USU.
then the device will send total, input and output octets in Used-Service-Unit (USU) AVP. If it comes with
Total-Octets, the device will send only Total-Octets in USU.
Usage
Use this command to configure reporting usage only for granted quota. On issuing this command, the Used-
Service-Unit AVP will report quotas based on grant i.e, only the quotas present in the Granted-Service-Unit
AVP.
With this command only the units for which the quota was granted by the DCCA server will be reported
irrespective of the reporting reason.
Service-Unit AVP will report quotas based on grant i.e, only the quotas present in the Granted-Service-Unit
AVP.
With this command only the units for which the quota was granted by the DCCA server will be reported
irrespective of the reporting reason.
Example
The following command configures to report usage based only on granted quota:
usage-reporting quotas-to-report based-on-grant