Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Crypto Template IKEv2-Dynamic Payload Configuration Mode Commands
▀ ipsec
▄ Cisco ASR 5x00 Command Line Interface Reference
2854
ipsec
Configures the IPSec transform set to be used for this crypto template payload.
Product
All Security Gateway products
Privilege
Security Administrator
Mode
Exec > Global Configuration > Context Configuration > Crypto Template Configuration > Crypto Template IKEv2-
Dynamic Payload Configuration
Dynamic Payload Configuration
configure > context context_name > crypto template template_name ikev2-dynamic > payload
payload_name match childsa
payload_name match childsa
match
{ any | ipv4 | ipv6 }
Entering the above command sequence results in the following prompt:
[context_name]host_name(cfg-crypto-tmpl-ikev2-tunnel-payload)#
Syntax
[ no ] ipsec transform-set list name
no
Specifies the IPSec transform set to be deleted. This is a space-separated list. From 1 to 4 transform sets can
be entered.
be entered.
name
must be an alphanumeric string of 1 through 127 characters.
ipsec transform-set list
name
Specifies the context configured IPSec transform set name to be used in the crypto template payload. This is a
space-separated list. From 1 to 4 transform sets can be entered.
space-separated list. From 1 to 4 transform sets can be entered.
name
must be an alphanumeric string of 1
through 127 characters.
Usage
Use this command to list the IPSec transform set(s) to use in this crypto template payload.
Example
The following command configures IPSec transform sets named
ipset1
and
ipset2
to be used in this
crypto template payload:
ipsec transform-set list ipset1 ipset2