Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
ACL Configuration Mode Commands
redirect css service (by ICMP packets) ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
291
redirect css service (by ICMP packets)
Redirects subscriber sessions based on the internet control message protocol packets sent by the source to the mobile
node or the network (Content Service Steering).
node or the network (Content Service Steering).
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > ACL Configuration
configure > context context_name > ip access-list acl_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-acl)#
Syntax
redirect css service service_name [ log ] icmp { any | host source_host_address |
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ]
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ]
before redirect css service service_name [ log ] icmp { any | host source_host_address |
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ]
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ]
after redirect css service service_name [ log ] icmp { any | host source_host_address |
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ]
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ]
no redirect css service service_name [ log ] icmp { any | host source_host_address |
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ]
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ]
after
Indicates all rule definitions subsequent to this command are to be inserted after the command identified by
the exact options listed.
This moves the insertion point to be immediately after the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, after the matching rule definition.
the exact options listed.
This moves the insertion point to be immediately after the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, after the matching rule definition.
Important:
If the options specified do not exactly match an existing rule definition, the insertion point does not
change.
before
Indicates all rule definitions subsequent to this command are to be inserted before the command identified by
the exact options listed.
This moves the insertion point to be immediately before the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, before the matching rule definition.
the exact options listed.
This moves the insertion point to be immediately before the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, before the matching rule definition.