Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
CSCF Peer Server Monitoring Configuration Mode Commands
registration ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2999
registration
This command specifies whether the S-CSCF skips third party registration to the Application Server (AS) by a
configured time after initial registration.
configured time after initial registration.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Peer Servers Configuration > Server Configuration
configure > context context_name > cscf peer-servers server_name type { bgcf | ibcf |
icscf | mgcf | mrcf | pcscf | scscf | sip-as } > server server_name { address ip_address
| domain domain_name )
icscf | mgcf | mrcf | pcscf | scscf | sip-as } > server server_name { address ip_address
| domain domain_name )
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-server_name-peer-server)#
Syntax
registration skip-count count
no registration skip-count
skip-count count
Number of times to skip third party registration.
count
must be an integer from 0 (default) to 60.
no registration skip-count
The S-CSCF does not skip third party registration to the AS by a configured time after initial registration.
Usage
Use this command to specify whether the S-CSCF skips third party registration to the Application Server
(AS) by a configured time after initial registration. After skipping the configured number of times, the third
party register should be sent again to AS to reduce overload on AS.
(AS) by a configured time after initial registration. After skipping the configured number of times, the third
party register should be sent again to AS to reduce overload on AS.
Example
The following command sets the number of times to skip third party registration to
25
:
registration skip-count 25