Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
CSCF Service Configuration Mode Commands
▀ release-call-on-media-loss
▄ Cisco ASR 5x00 Command Line Interface Reference
3134
release-call-on-media-loss
Release call on detection of media loss.
Product
SCM (P-CSCF, A-BG)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service)#
Syntax
release-call-on-media-loss media-type audio [ timeout seconds ]
no release-call-on-media-loss
no
Disables the release of SIP calls upon the detection of media loss.
media-type audio
Enables the release of SIP calls upon the detection of media loss on media-type audio.
timeout seconds
Specifies the media loss timeout value; media loss after timeout value results in call release.
seconds
must be an integer from 5 to 3600.
If timeout value is not configured, media loss after 5 seconds results in call release.
Usage
Use this command to enable the release of SIP calls upon the detection of media loss.
Example
Enables the release of SIP calls upon the detection of media loss:
release-call-on-media-loss media-type audio
Enables the release of SIP calls upon the detection of media loss:
no release-call-on-media-loss