Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
CSCF Serving-CSCF Configuration Mode Commands
▀ sip-request
▄ Cisco ASR 5x00 Command Line Interface Reference
3182
sip-request
Configures SIP Request-related configuration in this S-CSCF service.
Product
SCM (S-CSCF, SIP Proxy)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > Serving-CSCF Configuration
configure > context context_name > cscf service service_name > serving-cscf
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service-serving-cscf)#
Syntax
sip-request re-route { max-attempts attempts | response-code code }
default sip-request re-route max-attempts
no sip-request re-route response-code code
default
Specifies a maximum number of two re-route attempts that a S-CSCF should allow for a given call before
passing the negative response upstream.
passing the negative response upstream.
no
Disables the specified Response code.
re-route
Specify SIP Request re-route related configuration.
max-attempts
attempts
Specifies the maximum number of re-route attempts that a S-CSCF should allow for a given call before
passing the negative response upstream.
passing the negative response upstream.
attempts
must be an integer from 1 to 10.
Default: 2
response-code
code
Specifies the list of Response codes that will be considered as re-routable responses to a call attempt.
code
must be a three-digit integer from 400 to 699.
Important:
You may configure a maximum of five response code values per S-CSCF service.