Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
DHCPv6 Client Configuration Mode Commands
▀ server-ipv6-address
▄ Cisco ASR 5x00 Command Line Interface Reference
3296
server-ipv6-address
Configures DHCPv6 server(s) with which the DHCPv6 client is to communicate.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > DHCPv6 Service Configuration > DHCPv6 Client
Configuration
Configuration
configure > context context_name > dhcpv6-service service_name > dhcpv6-client
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-dhcpv6-client)#
Syntax
server-ipv6-address ipv6_address [ port port_number ] [ priority priority ] [ -noconfirm
]
]
no server-ipv6-address ipv6_address
no
Deletes a previously configured DHCPv6 server.
ipv6_address
Specifies the IP address of the DHCPv6 server expressed in IPv6 colon-separated-hexadecimal notation.
Default: FF02::1:2
Default: FF02::1:2
port
port_number
Specifies the port used for communicating with the DHCPv6 server.
port_number
must be an integer from 1 through 65535. If unspecified, the default port is 547.
priority
priority
Specifies the priority of the server if multiple servers are configured.
priority
is an integer from 1 through 1000. 1 is the highest priority.
-noconfirm
Executes the command without prompting for further input from the user.