Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
EAP Configuration Mode Commands
mode ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3415
mode
Configures the system as one of three types of EAP devices: authenticator pass-through, authenticator server, or peer.
Product
PDIF
ASN-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > EAP Profile Configuration
configure > context context_name > eap-porfile profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(cfg-ctx-eap-profile)#
Syntax
mode { authenticator-pass-through | authenticator-server | peer }
default mode
default
Configures the default mode of Authenticator-pass-through.
authenticator-pass-through
Configures the system as an authenticator pass-through allowing EAP authentication to be performed by
another server.
This is the default setting for this command.
another server.
This is the default setting for this command.
authenticator-server
Configures the system as an authenticator server. This allows the system to respond to EAP requests.
peer
Configures the system as a peer device requiring it to make EAP requests of another server or pass-through
device.
device.
Usage
Use this command to configure the system to perform as one of three types of EAP devices and configure
settings in an EAP mode.
EAP Mode Configuration Mode commands are defined in the EAP Mode Configuration Mode Commands
chapter.
settings in an EAP mode.
EAP Mode Configuration Mode commands are defined in the EAP Mode Configuration Mode Commands
chapter.
Example
The following command configures the system to perform as an authenticator pass-through:
mode authenticator-pass-through