Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
eGTP Service Configuration Mode Commands
interface-type ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3465
interface-type
Configures the interface type used by this service.
Product
ePDG
MME
P-GW
SAEGW
S-GW
SaMOG
SGSN
Important:
Prior to release 16, the SGSN only supported this command on the ASR 5000 platform.
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > eGTP Service Configuration
configure > context context_name > egtp-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-egtp-service)#
Syntax
interface-type { interface-cgw-egress | interface-epdg-egress | interface-mme |
interface-pgw-ingress | interface-sgsn | interface-sgw-egress | interface-sgw-ingress }
interface-pgw-ingress | interface-sgsn | interface-sgw-egress | interface-sgw-ingress }
{ interface-cgw-egress | interface-epdg-egress | interface-mme | interface-pgw-
ingress | interface-sgsn | interface-sgw-egress | interface-sgw-ingress }
ingress | interface-sgsn | interface-sgw-egress | interface-sgw-ingress }
interface-cgw-egress
: Specifies the SaMOG Gateway's EGTP interface for egress.
interface-epdg-egress
: Specifies that the interface has the characteristics of an ePDG's egress EGTP
interface.
interface-mme
: Specifies that the interface has the characteristics of an eGTP MME S11 reference point
to/from an S-GW or an eGTP MME Sv reference point to/from a Mobile Switching Center (MSC).
interface-pgw-ingress
: Specifies that the interface has the characteristics of an eGTP P-GW S5/S8
reference point from an S-GW. The interface assumes the characteristics of either a GTP-C (control Plane) or
GTP-U (user plane) reference point.
GTP-U (user plane) reference point.
interface-sgsn
: Specifies that the interface has the characteristics of an eGTP S-GW S4 reference point
to/from an SGSN. On an S4-SGSN, this option specifies that the eGTP service is used for an S4-SGSN and
gives the service the characteristics required for messaging towards an SGW (S4) / MME (S3) / S4-SGSN
(S16).
gives the service the characteristics required for messaging towards an SGW (S4) / MME (S3) / S4-SGSN
(S16).
interface-sgw-egress
: Specifies that the interface has the characteristics of an eGTP S-GW S5/S8
reference point to an eGTP P-GW. The interface assumes the characteristics of either a GTP-C (control
Plane) or GTP-U (user plane) reference point.
Plane) or GTP-U (user plane) reference point.