Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Ethernet Interface Configuration Mode Commands
ip ospf network ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3509
ip ospf network
Configures the Open Shortest path First (OSPF) network type.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Ethernet Interface Configuration
configure > context context_name > interface interface_name broadcast
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-eth)#
Syntax
ip ospf network { broadcast | non-broadcast | point-to-multipoint | point-to-point }
no ip ospf network
no
Disable this function.
broadcast
Sets the network type to broadcast.
non-broadcast
Sets the network type to non-broadcast multi access (NBMA).
point-to-multipoint
Sets the network type to point-to-multipoint.
point-to-point
Sets the network type to point-to-point.
Usage
Use this command to specify the OSPF network type.
Example
To set the OSPF network type to
broadcast
, enter the following command;
ip ospf network broadcast