Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Ethernet Interface Configuration Mode Commands
▀ pool-share-protocol
▄ Cisco ASR 5x00 Command Line Interface Reference
3524
pool-share-protocol
Configures the primary or secondary system for the IP pool sharing protocol and enter IPSP configuration mode.
Product
PDSN
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Ethernet Interface Configuration
configure > context context_name > interface interface_name broadcast
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-eth)#
Syntax
pool-share-protocol { primary ip_address | secondary ip_address } [ mode { active |
inactive | check-config } ]
inactive | check-config } ]
no pool-share-protocol
no
Deletes the IP pool sharing protocol information from the current interface.
primary
address
On the secondary system, defines the IP address of an interface on the primary system that has identical IP
pools configured for use with the IP pool sharing protocol.
pools configured for use with the IP pool sharing protocol.
ip_address
must be expressed in IP v4 dotted-
decimal notation.
secondary
ip_address
On the primary system, define the IP address of an interface on the secondary system that has identical IP
pools configured for use with the IP pool sharing protocol.
pools configured for use with the IP pool sharing protocol.
ip_address
must be expressed in IP v4 dotted-
decimal notation.
mode {active | inactive | check-config}
This is an optional command to manage the mode for IP pool sharing protocol for primary or secondary HA.
active
: Activates the IP pool sharing protocol mode.
inactive
: Inactivates the IP pool sharing protocol mode.
check-config
: Verifies the IP pool sharing protocol configuration.
Usage
Use this command to set the IP address of the primary or secondary system for use with the IP pool sharing
protocol and enter ipsp configuration mode. This command must be configured for an interface in each
protocol and enter ipsp configuration mode. This command must be configured for an interface in each