Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode Commands (A-C)
cli ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3793
cli
Specifies command line interface (CLI) session behavior.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] cli { history | stop-on-first-error | test-commands [encrypted] password
password_string }
password_string }
no
Disables the specified keyword functionality.
history
Enables command line history for the current command line session. Default: Enabled
stop-on-first-error
When enabled and a configuration file is loaded, the system stops loading the configuration file on the first
syntax error. Default: Disabled
syntax error. Default: Disabled
test-commands
[encrypted]
password
password_string
If you are logged in as a Security Administrator or Administrator enabling this command displays diagnostic
commands and supplemental keywords to existing commands. The
commands and supplemental keywords to existing commands. The
cli hidden
command in Global
Configuration mode must be enabled to grant access to this keyword. Default: Disabled
Caution:
CLI test-commands are intended for diagnostic use only. Access to these commands is not required
during normal system operation. These command are intended for use only by Cisco TAC personnel. Some of these
commands can slow system performance, drop subscribers, and/or render the system inoperable
commands can slow system performance, drop subscribers, and/or render the system inoperable
[encrypted]
password
password_string
: Password must be entered to access the CLI test-commands.
This password must have been previously configured by a Security Administrator via the Global
Configuration mode
Configuration mode
tech-suport test-commands password
command. The password is an
alphanumeric string of 1 through 64 characters (plain text password) or 1 through 524 characters (encrypted
password).
If the
password).
If the
password
keyword is not entered, the user is prompted (no-echo) to enter the password. If
tech-
support test-commands password
has not been enabled, you will be unable to execute
cli test-
commands
.