Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode Commands (D-S)
debug ipv6 ospf lsa ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3837
debug ipv6 ospf lsa
Enables or disables troubleshooting on OSPFv3 Link State Advertisements (LSAs), based on the specific LSA option. If
no keywords are specified, all options are enabled. If logging is enabled, results are sent to the logging system.
no keywords are specified, all options are enabled. If logging is enabled, results are sent to the logging system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] debug ip ospf lsa [ flooding | generate | install | maxage | refresh ]
no
Disables the specified LSA debug information. If no keyword is specified, all LSA debug information is
disabled.
disabled.
flooding
Enables LSA flooding information.
generate
Enables LSA generation information.
install
Enables LSA install information.
maxage
Enables LSA maximum age information in seconds. The maximum age is 3600 seconds.
refresh
Enables LSA refresh information.
Usage
Use this command to output debug information for LSAs.
Example
To enable all LSA debug information, enter the following command;