Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
ACS Charging Action Configuration Mode Commands
content-filtering processing server-group ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
385
content-filtering processing server-group
This command allows you to enable/disable Category-based Content Filtering.
Product
CF
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-charging-action)#
Syntax
content-filtering processing server-group
{ default | no } content-filtering processing
default
Configures this command with its default setting.
Default: Content filtering configured for the rulebase is attempted
Default: Content filtering configured for the rulebase is attempted
no
Specifies to bypass content filtering.
This configuration should only be specified for charging actions that are performed when known safe sites are
being accessed.
This configuration should only be specified for charging actions that are performed when known safe sites are
being accessed.
Usage
Use this command to enable or disable Category-based Content Filtering in the charging action.
This command works as second-level filter to process the HTTP/WAP GET request with Internet Content
Adaptation Protocol (ICAP) after ruledef matching. The first-level filtering is in the rulebase configuration.
This CLI command is only effective when the
This command works as second-level filter to process the HTTP/WAP GET request with Internet Content
Adaptation Protocol (ICAP) after ruledef matching. The first-level filtering is in the rulebase configuration.
This CLI command is only effective when the
content-filtering mode server-group
command is
configured in the rulebase.
Example
The following command enables content filtering in the current charging action:
content-filtering processing server-group