Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode Commands (D-S)
▀ mme reset
▄ Cisco ASR 5x00 Command Line Interface Reference
3918
mme reset
Sends an S1 RESET message to a designated eNodeB to reset all UE-associated S1 connections.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
mme reset s1-peer peer_ID
s1-peer peer-ID
Specifies an existing eNodeB peer ID to which the REST message is to be sent as an integer from 1 through
4294967295.
4294967295.
Usage
Use this command to send an S1 RESET message to a designated eNodeB to reset all UE-associated S1
connections.
The S1 peer ID for an eNodeB can be identified by executing the
connections.
The S1 peer ID for an eNodeB can be identified by executing the
show mme-service enodeb-
association
command available in this mode. The peer ID is presented in the “Peerid” field.
Example
The following command initiates the sending of an S1-peer reset message to an eNodeB with a peer ID of
22315734
:
mme reset s1-peer 22315734