Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode Commands (D-S)
session trace random ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3975
session trace random
Enable or disables the subscriber session trace functionality based on a the random trace on the network element. If
enabled, the subscriber selection will be based on random logic all instance of session on a specified UMTS/EPS
network element. It also clears/resets the statistics collected for subscriber session trace on a system.
enabled, the subscriber selection will be based on random logic all instance of session on a specified UMTS/EPS
network element. It also clears/resets the statistics collected for subscriber session trace on a system.
Product
GGSN
P-GW
Privilege
Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[no] session trace random random_num network-element {ggsn | pgw} [interface {all |
interface]
interface]
no
Disables the entire random subscriber session trace or for a specific network element and/or interface.
session trace random random_num}
Configures the number of random subscriber sessions where the session trace is to occur.
random_num
is an integer between 1 to 1000 identified the number of subscribers to be selected by random
logic.
network-element {ggsn | pgw}
Identifies the network element that, in turn, identifies the interfaces where the random session trace is to
occur. Specific interfaces can be specified using the interface keyword described below.
occur. Specific interfaces can be specified using the interface keyword described below.
ggsn
: Specifies that the random session trace is to occur on one or all interfaces on the GGSN.
pgw
: Specifies that the random session trace is to occur on one or all interfaces on the P-GW.
interface { all |
interface }
Specifies the interfaces where the random session trace application will collect data.
all
: Specifies all interfaces associated with the selected network element
interface
: Specifies the interface type where the random session trace application will collect trace data.
The following interfaces are applicable for the network element type:
GGSN:
gi
: Specifies that the interface where the trace will be performed is the Gi interface between
the GGSN and RADIUS server.
gmb
: Specifies that the interface where the trace will be performed is the Gmb interface
between the GGSN and BM-SC.