Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode show Commands (A-C)
▀ show active-charging flow-mappings
▄ Cisco ASR 5x00 Command Line Interface Reference
4076
show active-charging flow-mappings
Displays information about all the active flow mappings based on the applied filters.
Product
PSF
NAT
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show active-charging flow-mappings [ all | call-id call_id | [ nat { not-required |
required [ nat-realm nat_realm_name ] } | trans-proto { tcp | udp } ] + [ | { grep
grep_options | more } ]
required [ nat-realm nat_realm_name ] } | trans-proto { tcp | udp } ] + [ | { grep
grep_options | more } ]
all
Displays all the available active-charging flow-mapping information.
call-id call_id
Displays detailed information for a call ID specified as an 8-digit hexadecimal number.
nat { required [ nat-realm string ] not-required }
Displays the active charging flow mappings for which NAT is enabled or disabled.
trans-proto { tcp | udp }
Displays the transport layer.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view the Active Charging flow-mapping details.
Example
The following command displays the total number of Active Charging flow-mappings:
show active-charging flow-mappings all